Differences

This shows you the differences between two versions of the page.

--- kernel:stali [2025/11/18 10:15] – [3.0] marlonivo
+++ kernel:stali [2025/11/18 10:37] (current) – [3.0] marlonivo
@@ Line 42: / Line 42: @@
 mkfs.ext4 /dev/sda1
 mkfs.ext4 /dev/sda2
-</code>
-Mount the disk partition
-<code>
-; sudo su
-# mkdir /mnt/rootfs-x86_64
-# mount /dev/sdX /mnt/rootfs-x86_64
-</code>
-Clone rootfs-x86_64
-<code>
-# cd /mnt
-# git clone http://git.sta.li/rootfs-x86_64
-</code>
-Setup the system
-<code>
-# cd /mnt/rootfs-x86_64/etc
-# # adjust rc.init/exit, etc.
-</code>
-Prepare chroot
-<code>
-# mount -t proc proc /mnt/rootfs-x86_64/proc
-# mount --rbind /sys /mnt/rootfs-x86_64/sys
-# mount --rbind /dev /mnt/rootfs-x86_64/dev
-# exit
 </code>
@@ Line 89: / Line 62: @@
 You can now see the exetubable kernel file under `/mnt/rootfs/boot/vmlinuz-6.6.3`.
-===== 3.0 =====
+===== 2.0 =====
 ----
@@ Line 102: / Line 75: @@
 APPEND root=/dev/sda1 rw
 EOF
+</code>
+===== 3.0 =====
+Mount the disk partition
+<code>
+; sudo su
+# mkdir /mnt/rootfs-x86_64
+# mount /dev/sdX /mnt/rootfs-x86_64
+</code>
+Clone rootfs-x86_64
+<code>
+# cd /mnt
+# git clone http://git.sta.li/rootfs-x86_64
+</code>
+Setup the system
+<code>
+# cd /mnt/rootfs-x86_64/etc
+# # adjust rc.init/exit, etc.
+</code>
+Prepare chroot
+<code>
+# mount -t proc proc /mnt/rootfs-x86_64/proc
+# mount --rbind /sys /mnt/rootfs-x86_64/sys
+# mount --rbind /dev /mnt/rootfs-x86_64/dev
 </code>