===== Stali =====

**Prerequisites:**
First we wanna have an booted up live ISO to be equipped with all the necessary tools to install a proper linux

Then we need an ssh connection to copy and paste the commands from this guide onto the machine more easily:
<code>
vim /etc/ssh/sshd_config
---
PermitRootLogin yes
</code>

Now give yourself a personal IP Address:
<code>
ip addr add 192.168.1.10/24 dev eth0
ip link set eth0 up
rc-service sshd start
</code>

Now change to the terminal of the computer you are reading this guide and type/copy in:
<code>
ssh root@192.168.1.10    <- enter the live ISO pw
</code>

===== 1.0 =====
----
Prepare a disk partition for stali, we recommend formatting it with ext4fs.
<code>
fdisk /dev/sda

    o → neue MBR-Tabelle

    n → neue Partition 1 → +100M → Typ 83 → a → Bootflag

    n → neue Partition 2 → Rest → Typ 83

    w → schreiben
</code>

Format disks
<code>
mkfs.ext4 /dev/sda1
mkfs.ext4 /dev/sda2
</code>

===== 2.0 =====
----

These are the necessary command to build the latest linux kernel:
<code>
pacman -Sy wget make gcc binutils bc bison flex elfutils cpio perl tar xz zsh-completion
cd /tmp/kernelbuild
wget https://cdn.kernel.org/pub/linux/kernel/v6.x/linux-6.6.3.tar.xz
tar -xf linux-6.6.3.tar.xz
cd linux-6.6.3
make x86_64_defconfig
make -j$(nproc)
make modules_install INSTALL_MOD_PATH=/mnt/rootfs
make install INSTALL_PATH=/mnt/rootfs/boot
</code>

You can now see the exetubable kernel file under `/mnt/rootfs/boot/vmlinuz-6.6.3`.

===== 2.0 =====
----

syslinux.cfg erstellen:

<code>
cat > /boot/syslinux.cfg <<EOF
DEFAULT void
LABEL void
LINUX /boot/vmlinuz
INITRD /boot/initramfs-linux.img
APPEND root=/dev/sda1 rw
EOF
</code>

===== 3.0 =====
Mount the disk partition
<code>
; sudo su
# mkdir /mnt/rootfs-x86_64
# mount /dev/sdX /mnt/rootfs-x86_64
</code>

Clone rootfs-x86_64
<code>
# cd /mnt
# git clone http://git.sta.li/rootfs-x86_64
</code>

Setup the system
<code>
# cd /mnt/rootfs-x86_64/etc
# # adjust rc.init/exit, etc.
</code>

Prepare chroot
<code>
# mount -t proc proc /mnt/rootfs-x86_64/proc
# mount --rbind /sys /mnt/rootfs-x86_64/sys
# mount --rbind /dev /mnt/rootfs-x86_64/dev
</code>

Syslinux-MBR schreiben

<code>
dd if=/usr/lib/syslinux/bios/mbr/mbr.bin of=/dev/sda
exit
umount -R /mnt/sysroot
sync
reboot
</code>
===== 4.0 =====
----
Read more:
   - https://sta.li